General Shop Services |
Price |
| Dyno Tune ATV or Motorcycle |
$125.00 |
| Dyno Tune ATV or Motorcycle and Program PC3 |
$150.00 |
| Dyno Tune ATV or Motorcycle and Program Dynatek CDI Box |
$150.00 |
bore carburetor (each) |
$55.00
|
bore cylinder & chamfer
ports |
$55.00
|
| Bore and Mod FCR Carb.43MM+ |
$200.00 |
| Bore and Mod FCR Carb.44MM+ new billet Center
section |
$250.00 |
| Mod Carb and install R&D Float Bowl includes
R&D Power Bowl |
$300.00 |
deck cylinder (singles) |
$45.00
|
port and re-chamber two stroke single ATV's |
$325.00
|
port and re-chamber two stroke single MX bikes w/ chrome bore |
$275.00
|
re-chamber cylinder head (two stroke singles) |
$65.00
|
rebuild crankshaft (two stroke singles) labor only |
$45.00
|
rebuild crankshaft (twins) true & weld labor only |
$150.00
|
split
two stroke cases, inspect crank & trans, re-assemble labor only |
$275.00
|
repair chain damaged cases (requires case split, not included) |
$40.00 & up |
repair cylinder head (two stroke singles) |
$35.00 & up |
repair cylinder/head studs
"install heli-coil" (each) |
$8.00
|
sleeve cylinder & match
ports (ported cylinders extra) |
$165.00
|
| sleeve cylinder & match ports ported
cylinder |
$225 & up |
repair damaged oil drain plugs
|
$65.00 |
Sandblast & paint engine (only available with CT services, seals not included) |
$150.00
|
| polish cylinder and head only |
$150.00 |
| polish complete engine (singles only, available only with CT engine services, seals not
included) |
$400.00 |
ATC/TRX250R
Special Services |
Price |
machine cases for big bore |
$100.00
|
rebuild counterbalancer (parts & labor) |
$60.00
|
repair chain damaged cases (cases must be split) |
$40.00 & up |
repair counterbalancer case |
$75.00
|
polish complete engine ( seals not included) |
$400.00
|
LT500 Special Services |
Price |
'87 cylinder/head stud upgrade
(parts & labor) |
$75.00
|
cylinder/head stud repair (each) labor only |
$12.00
|
main bearing case inserts (left & right) |
$290.00
|
repair cracked cylinder (weld & gusset) cylinder boring not included |
$100.00
|
polish complete engine (available only with CT engine services, seals not included) |
$400.00
|
Banshee Special
Services |
Price |
port cylinders, re-chamber
head, mod. stator plate |
$450.00
|
re-chamber head |
$90.00
|
|
bore cases for big bore Cylinder
|
$150.00 |
rebuild crankshaft (true & weld) labor only |
$150.00
|
polish complete engine (available only with CT engine services, seals not included) |
$400.00
|
Four Stroke
Engine Services |
|
split
four stroke cases, inspect crank & trans, re-assemble labor only |
$475.00 |
| top end tear down and re-assembly |
$250.00 |
| disassemble head, clean ports,
re-assemble |
$65.00 |
| four stroke 2 valve head porting only |
$250.00 |
| four stroke 4 valve head porting only |
$350.00 |
| four stroke 5
valve head porting |
$375.00 |
| 5 Angle Radius
valve job 1mm+ oversize valves (price per valve) |
$65.00 |
| 5 Angle Radius valve
job (added HP) (price per valve) |
$45.00 |
| 3 Angle valve
job (normal performance) (price per valve) |
$35.00 |
| remove, replace and size valve guide only, (per
valve, guide not included) |
$28.00 |
| bore cylinder |
$65.00 |
| rebuild crankshaft, four stroke |
$75.00 |