Part #

Description

Price

Can Am / Bombardier DS 650 Pipe Kit

Can Am / Bombardier DS 650 exhaust kit includes a stainless header, muffler with 12 discs, and jet kit.

Turn down tip includes 6 stainless steel bolts.

This turn down tip CT sonic pipe, and any pipe that uses the 4" Supertrapp disc System.

Shop Services

CT Racing has done significant amounts of flow bench and dyno testing to offer you the best port layout for your application. We highly recommend getting a valve job at the same time the head is being ported. Our CNC valve job ties in with the port work to offer extremely effective flow numbers.

Quality valve job. Seats not included.

The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. Seats not included. 

The 5 angle radius Race valve job significantly raises the flow characteristics at low valve lift and definitely shows a horsepower increase throughout the useable power curve. The 5 angle valve job really shines on big valves as the seat diameter is opened up all the way into the aluminum casting, blending to the port work. Adding +1mm valves to a modified engine package helps the mid to top-end horsepower. Most aftermarket hi compression pistons are clearanced for +1mm valves. Seats not included.

Can Am / Bombardier DS 650 JE Piston Kit

DS650 JE Hi Performance Piston Kit - 100mm 11.5:1 Comp Ratio

Can Am / Bombardier DS 650 JE Piston Kit

DS650 JE Hi Performance Piston Kit - 105mm Big Bore 11.5:1 Comp Ratio 720cc

Cylinder resleeve required.

DS650 Cometic Top-end Gasket Set (does not include valve stem seals) - 101mm

DS 650 727 BIG BORE KIT

Can Am / Bombardier DS 650 727 KIT

DS650 JE Hi Performance Piston Kit - 105mm Big Bore 11.5:1 Comp Ratio 720cc

Cometic Top End Gasket Set

LA Sleeve 105mm sleeve. Cylinder must be machined To Install sleeve.

Kit with sleeve, piston and gaskets.

KIT PRICE DOES NOT INCLUDE SLEEVE INSTALLATION.

DS650 Cometic Top-end Gasket Set (does not include valve stem seals) - 105.5mm Big Bore

Performance profile designed to increase overall performance. No modifications required. This is a great choice for a pump gas set up, although it doesn't require a high compression piston, Sliding in an 11.5/1 piston, along with this cam, a good pipe and a Dynojet needle makes an extremely barky, fun to ride motor that just rips right from the bottom. Great on trails and just all around riding.

DS650 Web Intake & Exhaust Camshaft Set - 284/284 Duration ($418.00 core charge or ship us your cams)

Performance profile designed to increase overall performance. Requires high compression piston and valve spring kit part #EC-KW-91-91010.

DS650 Web Intake & Exhaust Camshaft Set - 287/284 Duration ($418.00.00 core charge or ship us your cams)

Race profile. Requires valve spring kit part #EC-KW-91-91010.

DS650 Web Intake & Exhaust Camshaft Set - 425 Lift 287 Duration ($418.00.00 core charge or ship us your cams)

Race profile, This has a long duration allowing the motor to turn High RPM great for Sand application, and drag racing. Requires valve spring kit part #EC-KW-91-91010.

DS650 Web Intake & Exhaust Camshaft Set - 435 Lift 272 Duration ($418.00.00 core charge or ship us your cams)

High lift, short duration profile to provide excellent torque and acceleration. This is a great cam for High speed applications.  Requires high compression piston, exhaust system, and valve spring kit part #EC-KW-91-91010.

Kibblewhite Black Diamond

DS650 Stainless Steel Standard Intake & Exhaust Valves   

Per Valve

Kibblewhite Black Diamond

DS650 Stainless Steel +1mm Intake & Exhaust Valves   

Per Valve

DS650 Hi Performance Lightweight Racing Valve Spring Kit with Titanium Retainers

Direct plug in performance: 4 programmable timing curves, programmable rev limiter, external curve selector switch, plug-in module replacement, and more.

Direct plug in performance: 4 programmable timing curves, programmable rev limiter, external curve selector switch, plug-in module replacement, and more.

These are the best off road bars money can buy. Bars come with three different elastomers to get the proper cushioning for your type of riding along with a cross bar pad in your color choice of blue, grey, or red. A 1-1/8" bar mount kit is required.

Tag T-2 CR High Bend 1-1/8" Fat Bars with Bar Pad

Bars are available in black or silver and bar pads are available in black, blue, or red. A 1-1/8" bar mount kit is required.

Tag Universal 1-1/8" Bar Mount Kit

This is a clamp set than converts your stock 7/8" bar clamp to the 1-1/8" Fat Bar set up. Can be used with any brand 1-1/8" bars.

Kit includes hand guards and mount kit. Hand guards are available in blue/black, black/black, silver/black, white/black, yellow/black, and blue/silver.

Brakes

Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered.

Available in black, blue, clear, green, red, or smoke. Some colors and lengths may need to be special ordered.

Can be used with any 3/4" or 1" diameter A-arm. Available in black, blue, red, or silver.   

Chassis

The Eliminator axle used for all forms of racing and high performance applications. Many of the models come with the patented Posi•Lock system which removes threaded sections from the flexing area of the shaft (a source of crack generation).

The Eliminator axle used for all forms of racing and high performance applications. Many of the models come with the patented Posi•Lock system which removes threaded sections from the flexing area of the shaft (a source of crack generation).